About the Etchings

These are original etchings, hand pulled in the artist's studio and signed in a very limited and numbered edition. In most prints, the etching ink that is used is Charbonnel, a superior quality French intaglio ink. French and Italian printmaking papers are used to pull each print and they are of archival quality.

Many people are confused as to what an original print is. This is not a photo reproduction process but rather totally an original, creative hand-done process by the artist. This fine art etching process dates back to the 16th century and such artists as Rembrandt, Turner, Whistler, Zorn, and John Sloan have pulled lasting images.

The etching process is as follows: First an 18-gauge copper or zinc plate is cut to size and a thin coat of liquid asphaltum called “hard ground” is brushed on to cover the plate. When the hard ground is completely dry, a pointed metal drawing tool called an etching needle is used to scribe through the ground to expose a shiny line of metal wherever it is scratched. This tool is used to draw the entire image on the plate.

When the drawing is completed, the plate is submerged in an acid bath. This bath can be a solution of 9 to 1 water and nitric acid. The acid “eats” down into the exposed metal line and resists the ground. A shallow line or deep line is created by the amount of time the plate is left in the acid bath.

When the plate has been properly etched, it is removed from the bath and the hard ground is removed with mineral spirits. The cleaned plate is now inked and a leather dauber is used to force the ink into the recessed etched lines. The plate is warmed and cheesecloth is used to lightly and carefully remove the surface ink. The plate is then placed on the etching press bed.

Paper is cut to size, soaked in water, blotted, and placed on top of the etching. Three felt blankets are placed over the plate and paper and they are cranked through the press under heavy pressure of two metal rollers, one above and one below the press bed. The felts are lifted and the paper removed from the etching plate. The recessed ink from the plate has been transferred to the paper and the etching is complete. The print then dries for three days between blotting paper so that the print does not buckle.

AWS Award Winner

2015-The-Artists-Magazine